Skeleton oil seal is mainly made of high quality steel plate and high quality rubber.
Notes for use are as follows:
1. Due to structural and design reasons, high-speed oil seal and low-speed oil seal can be reasonably selected according to the rotation speed of skeleton seal rotation axis. High-speed oil seal is generally selected, and vice versa, so it cannot be mixed.
2. If the ambient temperature is relatively high, polypropylene, fluorine or siloflurane should be selected as the material for making the skeleton oil seal, and the oil temperature in the oil tank should be effectively lowered. If the ambient temperature is relatively low, the oil seal made of rubber resistant to low temperature can be selected.
3. The endurance of ordinary skeleton oil seals is relatively general. If the pressure is too high during work, it will easily lead to its deformation and reduced sealing.
4. should pay attention to the shaft surface finish, generally speaking, the smoother the shaft, the service life of the oil seal will be longer.
5. the lips and mouth should be added an appropriate amount of lubricating oil, and pay attention not to let dust, rain into.The USES are as follows: at present, its USES are very wide, we can see it in the automobile, motorcycle differential, engine, crankshaft, camshaft, front and rear wheels, axle and other places to see it.It is also often used in construction machinery to prevent leakage of lubricating oil.
